Campbell CR6 Series, Руководство оператора, Страница: 569 / 690

Section 10. Troubleshooting
569
CR6 Terminal Commands
Command Description Use
SDI12 SDI12 talk through
Issue commands from keyboard that are passed through
the CR6 SDI-12 port to the connected device. Similar in
concept to Serial Talk Through.
T Unused
U Data recovery
Provides the means by which data lost when a new
program is loaded may be recovered. See section
Troubleshooting — Data Recovery
(p. 570)
for details.
V Low level memory dump Campbell Scientific engineering tool
W Comms Watch (Sniff)
Enables monitoring of CR6 communication traffic. No
timeout when connected via PakBus.
X Peripheral bus module identify Campbell Scientific engineering tool
FIGURE 136: DevConfig Terminal Tab
10.10.1 Serial Talk Through and Comms Watch
The options do not have a timeout when connected in terminal mode via PakBus.
Otherwise P: Serial Talk and W: Comms Watch ("sniff") modes, the timeout
can be changed from the default of 40 seconds to any value ranging from 1 to
86400 seconds (86400 seconds = 1 day).
When using options P or W in a terminal session, consider the following:
• Concurrent terminal sessions are not allowed by the CR6.
•
Opening a new terminal session will close the current terminal session.