Campbell CR3000 Micrologger, Руководство оператора

Страница: 592 / 644

Appendix A. Info Tables and Settings
592
Info Tables and Settings: U
Keyword Data Type
R
ead
O
n
ly
• Where to Find
Description
UDPBroadcast
Filter
UINT2
•
Settings Editor: Advanced | IP Broadcast Filtered
Default =
0.
USRDriveFree Numeric Y
•
Keyboard: Settings (Advanced)
Bytes remaining on the USR: drive. USR: drive is user-created and normally used to store
.jpg and other files. Default =
0.
USRDriveSize Numeric
•
Settings Editor: Advanced | USR: Drive Size
Sets size (bytes) of the USR: drive. If 0 (default), the drive is removed. If non-zero, the
drive is created. A change will cause the CRBasic program to recompile.
UTCOffset Numeric
•
Settings Editor: Advanced | UTC Offset
Difference (s) between local time (CR3000 clock) and UTC. Used in email, HTML headers,
GPS(), NetworkTimeProtocol(), and DaylightSavingTime()
. Default =
-1 (disabled).
Info Tables and Settings: V
Keyword Data Type
R
ead
O
n
ly
• Where to Find
Description
VarOutOfBound Numeric Y
•
Station Status field: Variable Out of Bounds
•
Status
table field: ≈21
Number of attempts to write to an array outside of the declared size. The write does not
occur. Indicates a CRBasic program error. If an array is used in a loop or expression, the
pre-compiler and compiler do not check to see if an array is accessed out-of-bounds (i.e.,
accessing an array with a variable index such as arr(index) = arr(index
–1), where index is a
variable). Updated at run time when the error occurs.
Verify() Numeric
•
Settings Editor: ComPorts Settings | Verify Interval
Array of integers indicating the intervals (s) that are reported as the link verification
intervals in PakBus hello transaction messages. Indirectly governs the rate at which the
CR3000 attempts to start a hello transaction if no other communication has taken place
within the interval.