Campbell CR3000 Micrologger, Руководство оператора

Страница: 591 / 644

Appendix A. Info Tables and Settings
591
StartTime NSEC Y
•
Station Status field: Start Time
•
Status table field: 8
Time (date and time) the CRBasic program started. Updates at beginning of program
compile.
StartUpCode Numeric Y
•
Status
table field: ≈19
Indicates how the running program was compiled. True: program compiled by CR3000
starting from a power-down condition. False: program compiled by either a Program
Send, a File Control transaction, or a watchdog reset. Updated at startup.
StationName
String
•
Station Status field: Reported Station Name
•
Settings Editor: Datalogger | Station Name
•
Status table field: 6
Station name stored in flash memory. This is not the same name as that is entered into
LoggerNet. This station name can be sampled into a data table, but it is not the name that
appears in data file headers. Updated at startup or when the name is changed.
SW12Volts() Numeric
•
Status
table field: ≈44
Status of switched, 12 Vdc terminal. True
= on. Updates when the state changes.
SystemProcTime
FLOAT Y
•
Status
table field: ≈37
Time (μs) required to process auto (background) calibration. Default is a
large number until
auto self-calibration runs.
Info Tables and Settings: T
Keyword Data Type
R
ead
O
n
ly
• Where to Find
Description
TCPClient
Connections
Discontinued; replaced by / aliased to PakBusTCPClients
(p. 587).
TCPPort Discontinued; replaced by / aliased to PakBusPort
(p. 586).
TelnetEnabled
NUMERI
C
•
Settings Editor: Network Services | Telnet Enabled
Enables (True) or disables (False) the Telnet service.
TimeStamp
NSEC Y Scan-time that a record was generated.