Campbell CR3000 Micrologger, Руководство оператора

Страница: 583 / 644

Appendix A. Info Tables and Settings
583
•
Specifies the gateway for CS I/O. A change will cause the CRBasic program to
recompile.
IPInfo
1
String
•
Settings Editor: Ethernet | {information box}
Indicates current parameters for IP connection. IPInfo is a status field but the CR3000
processes it as a setting to minimize bandwidth. It requires about 1.5 KB when all IP
interfaces are active. This 1.5 KB is transfered each time it is requested regardless of how
many IP interfaces are actually used. See IPInfo() CRBasic instruction. Updates when
status is queried.
IPMaskCSIO() String
•
Settings Editor: CS I/O IP | Subnet Mask
IPMaskEth String
•
Settings Editor: Ethernet | Subnet Mask
Specifies the subnet mask for the Ethernet interface. This setting is made available when an
Ethernet link is connected. A change will cause the CRBasic program to recompile.
IPTrace Discontinued; aliased to IPTraceComport
IPTraceCode UINT2
•
Settings Editor: Advanced | IP Trace Code
Controls what type of information is sent on the port specified by IPTraceComport and via
Telnet. Default =
0.
IPTraceComport Numeric
•
Settings Editor: Advanced | IP Trace COM Port
Specifies the port (if any) on which TCP/IP trace information is sent. Information type is
controlled by IPTraceCode. Default is 0
= inactive.
IsRouter Numeric
•
Settings Editor: Advanced | Is Router
Controls configuration of CR3000 as a router or leaf node. True
= router.
False
(default) =
leaf node.
IxResistor
Numeric Y
•
Status
table field: ≈51
Factory-calibrated correction factor (ohms) applied to resistance measurements. Normal
value is near 1000 ohms. Updates at start up.
Info Tables and Settings: L
Keyword Data Type
R
ead
O
n
ly
• Where to Find
Description
LastSlowScan()
NUMERI
C
Y
•
Status
table field: ≈37
Reports the last time a SlowSequence scan in the CRBasic program was executed. See
MaxSlowProcTime
(p. 584),
SkippedSlowScan
(p. 590),
SlowProcTime
(p. 590).