Campbell CM 21 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 65

Campbell CM 21 Скачать руководство пользователя страница 3

3

IMPORTANT USER INFORMATION

Reading this entire manual is recommended for full

understanding of the use of this product.

The exclamation mark within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance instructions in the
literature accompanying the instrument.

Should you have any comments on this manual we will be pleased to receive
them at:

Kipp & Zonen B.V.

Röntgenweg 1

2624 BD Delft

P.O. Box 507

2600 AM Delft

Holland

Phone

+31 (0)15 2698000

Fax

+31 (0)15 2620351

Email [email protected]

Kipp & Zonen reserve the right to make changes to the specifications without
prior notice.

WARRANTY AND LIABILITY

Kipp & Zonen guarantees that the product delivered has been thoroughly
tested to ensure that it meets its published specifications. The warranty
included in the conditions of delivery is valid only if the product has been
installed and used according to the instructions supplied by Kipp & Zonen.

Kipp & Zonen shall in no event be liable for incidental or consequential
damages, including without limitation, lost profits, loss of income, loss of
business opportunities, loss of use and other related exposures, however
caused, arising from the faulty and incorrect use of the product.
User made modifications can affect the validity of the CE declaration.

COPYRIGHT

©

2001 KIPP & ZONEN

All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted in any form or by any means, without
permission in written form from the company.

«
1
2
3
4
5
...
»

Содержание CM 21


































































Отзывы:

Нет отзывов