Campbell CCFC, Руководство по эксплуатации продукта

Страница: 17 / 144

Button continuously for more than 10 seconds or by using the Power Icon on the web
interface.
l
Always ensure that all cable connectors and covers are securely in place.
l
Record any changes to the IP settings of the camera. This information is important to gain
access to the camera for focusing or reconfiguration.
l
The camera configuration file can be imported or exported using the web interface. This
feature can be found under Import/Export.
l
Check the Campbell Scientific website www.campbellsci.com/ccfc for firmware updates
that may apply.
6.2 Campbell Scientific data logger users
l
Ensure that the data logger has the latest PakBus® operating system.
l
Use either the CCFC built in-web interface, Device Configuration Utility , or LoggerNet
PakBus® Graph to change settings in the camera.
l
Use the Device Configuration Utility to change settings in MD485 or other PakBus®
devices.
l
Use the Device Configuration Utility to set the data logger memory and PakBus®
parameters.
l
Ensure that files (pictures or video) are less than 2 MB for PakBus® transmissions.
l
Use the
SendVariables
data logger instruction to send variables or text to the camera
used as photo or video captions. The instruction can also control the window defroster.
Downloadable CRBasic examples are available at www.campbellsci.com/ccfc .
NOTE:
The camera supports only a limited subset of PakBus functionality.
6.3 Configuration process
1. Determine what will trigger the capture of a photo or video. Options include:
a. Timed Capture – Enable and configure Timed Capture 1, Timed Capture 2, or both. To
set this up using the web interface, see Timed Capture (p. 43).
b. External Trigger – Enable and configure the External Trigger capture. To set this up
using the web interface, see External Trigger (p. 49).
CCFC Field Camera 11