Campbell CCFC Field Camera, Инструкция по эксплуатации

Страница: 121 / 127

CCFC Field Camera
107
20. Mounting
The camera enclosure is designed to be environmentally sealed
for outdoor installations. The enclosure provides protection from
moisture or high humidity. It is not intended for operation under
water. All that is required is an appropriate mounting fixture.
Figure 20-1 CCFC Mounting Kit
The camera is equipped with a set of three ¼-20 threaded
mounting holes (see Figure 20-2). These mounting holes are
centred along the bottom of the camera and are spaced 1.0” (25.4
mm) apart from one another. At least two of the ¼-20 threaded
holes are required for mounting the camera.
Figure 20-2 CCFC Mounting Holes
When using the optional Mounting Kit, align the outer holes of
the CCFC with the center hole and the 180° slot of the mount.
Loosely secure the two together with the two ¼-20 x 0.5” Hex