Campbell AL205B, Руководство по эксплуатации продукта

Страница: 12 / 27

FIGURE 3-1. Messages displayed on A2Control
3.3 Pass reject list
The AL205R repeater firmware supports up to two different pass or reject lists for determining the
messages to repeat. Before a message is repeated, it is checked against all active address lists.
Lists can be either a pass list, where only listed entries are repeated, or a reject list where
messages are repeated by default, but dropped if they are in the list. Messages can be filtered by
Source Address, Destination Address, or the path list added by other repeaters. Messages can
either be reported locally in the ALERT2 logs or dropped silently. These lists can be configured on
the address lists tab in the A2Control software, or they can be configured via the ALERT2 IND API.
4. Firmware updates
Update the AL205R/AL205B firmware either locally by using a USB drive or remotely by using
SFTP. Download the latest firmware from:
l
AL205R— www.campbellsci.com/al205r
l
AL205B— www.campbellsci.com/al205b
AL205R / AL205B ALERT2 Repeater / Base 10