1
A300 Power and Signal Converter
1. Overview
The A300 is a logic level shifter and voltage converter. It provides two level
shifting channels; the first converting 5 V to 3.3 V, and the second converting
3.3 V to 5 V. Additionally, it provides a regulated 3.3 V power output.
2. Precautions
•
READ AND UNDERSTAND the
Safety
section at the
front
of this
manual.
•
The black outer jacket of the cable is Santoprene
®
rubber. This compound
was chosen for its resistance to temperature extremes, moisture, and UV
degradation. However, this jacket will support combustion in air. It is rated
as slow burning when tested according to U.L. 94 H.B. and will pass
FMVSS302. Local fire codes may preclude its use inside buildings.
3. Initial Inspection
•
Upon receipt of the A300, inspect the packaging and contents for damage.
File damage claims with the shipping company.
4. Specifications
Dimensions:
Cable:
Terminals:
Mounting:
Packaging:
Temperature:
Supply Voltage:
Supply Current:
Power Output:
5 V Signal Input:
5 V Signal Output:
3 V Signal Input:
3 V Signal Output:
Maximum Voltage
Translation Rate:
78 x 46 x 9.3 mm (3.08 x 1.8 x 0.36 in)
30.48 cm (12 in), 4 conductor, 22 AWG,
Santoprene
4 screw terminals, 12-24 AWG, 0.2 inch pitch
2 mounting holes (1 in on cent
re
), 1.9 mm (0.075
in) diameter
Wide temperature polyamide over-mo
u
ld
–40 to 70 °C
9 to 16 Vdc, for 12 Vdc nominal systems
100 µA quiescent
3.3 Vdc, ±3%, up to 20 mA guaranteed
0 to 6 Vdc, l
ogic low ≤ 1.4
V, logic h
igh ≥ 3.4 V
5 Vdc, ±3%, 600 Ohms output impedance
0 to 6 Vdc, l
ogic low ≤ 0.8 V,
logic h
igh ≥ 2 V
3 Vdc ±3%, 600 Ohms output impedance
210 Mbps
Compliance Documents:
View at
