FIGURE 7-1. 110PV strain relief label
7.2.3 Extreme sealing tape
If the temperature might exceed 70 °C, extreme sealing tape is required to better secure the
sensor to the measurement surface.
To ensure that the sensor disk is adequately fastened to the measurement surface, use three
strips of extreme sealing tape in two places each:
1. Place a strip of tape across the sensor head, perpendicular to the cable and rub the tape
surface to remove bubbles. Rub as close as possible to the sensor disk.
CAUTION:
Do
not
place
tape
over
the
sensor
mo
u
lding;
only
place
tape
on
the
metal
disk
portion
of
the
sensor.
110PV Surface Temperature Probe
9