Campbell 110PV, Инструкция по эксплуатации

Страница: 13 / 38

110PV Surface Temperature Probe
5
FIGURE 5-1. 110PV Temperature Probe
The –L portion of the probes model number indicates the probe has a user-
defined cable length that is specified when the probe is ordered.
The probe’s cable can terminate in:
•
Pigtails that connect directly to a Campbell Scientific datalogger
(option –PT).
•
Connector that attaches to a prewired enclosure (option –PW). Refer
to
www.campbellsci.com/prewired-enclosures
for more information.
• Connector that attaches to a CWS900 Wireless Sensor Interface
(option –CWS). The CWS900 allows the 110PV to be used in a
wireless sensor network. Refer to www.campbellsci.com/cws900 for
more information.
6. Specifications
Features:
•
Easy to install—adhesive strips on the 110PV’s smooth face adhere to
the back of a solar panel or other device
• Aluminum disk protects thermistor and promotes heat transfer from
surfaces
•
Makes accurate measurements in environments with heavy
electromagnetic interference
• Compatible with Campbell Scientific CRBasic dataloggers: CR6,
CR200(X) series, CR800 series, CR1000, CR3000, and CR5000
Stain-relief label
Santoprene
®
-jacketed cable
Overmolded joint
Thermistor encased in
an aluminum disk