Model 109 Temperature Probe
2
3.
In the search box under the
Available Sensors and Devices
heading, type
in 109 or find the 109 in the
Sensors | Temperature
folder. Double-click
the
109 Temperature Probe
. Data defaults to degree Celsius. This can be
changed by clicking the
Deg C
box and selecting
Deg F,
for degrees
Fahrenheit, or
K,
for Kelvin. After entering the
Properties
, click on the
Wiring
tab to see how the sensor is to be wired to the datalogger.
4.
Select any other sensors you have, and then finish the remaining
Short Cut
steps to complete the program.