FT-244 Cirrus Garden Terrace Fountain
Revised March 8, 2018
Assemble your fountain on a level surface capable of holding a minimum of 50
pounds with an approximate 0.25 square foot footprint.
FT-243B (34 lbs)
16”W x 6.75”H
FT-244A (10 lbs)
12”W x 1.25”H
1.
Position the basin (FT-243B) where the
fountain is to be installed, ensuring that it is
level.
2.
Assemble the pump kit.
a.
NOTE: All pumps come with 1
adapter already inserted into the
pump and 2 adapters secured to the
power cord.
i.
This fountain uses the largest
adapter provided.
b.
Using a hose clamp, attach the 1/2” non-
kink tubing to the pump outlet.
c.
Place the stopper around the pump cord
approximately 6 inches from the pump.
3.
Feed the pump cord all the way through the
hole and the channel in the basin (FT-243B)
to ensure the fountain will be level.
a.
Line up the split in the stopper with the
direction that the channel under the
basin goes.
4.
FIRMLY
press the stopper into the hole
evenly.
5.
Holding the water feature disc (FT-244A)
over the basin (FT-243B), insert the PVC
connected to the non-kink tubing into the
PVC coupling protruding from the bottom of
the disc.
6.
Center the water feature (FT-244A) into basin
(FT-243B).
7.
Fill the fountain with water.
