CAMPAGNOLA POWER ECO, Руководство по эксплуатации и обслуживанию

Страница: 25 / 120

Page 24
Use and Maintenance Manual – Translation of
Original Instructions Rev.: 03, Date 30/11/2021
3.5 Tool composition
3.6 Technical data
3.7 Safety devices
• Bright ON-OFF LED (9): indicates that the tool is working.
• Max. motor absorption limit: 15 fuse (8).
3.8 Symbols and warnings
4 INSTALLATION AND START-UP
4.1 Start-up
• Extract the power unit (1) and the cable (14) from the relevant holder.
• Fit the power unit on the pole with the selected tool, engage the transmission shaft (10) and tighten the screws (2)
of the clamp (3).
• Insert the power cable (14) into the handle slot.
• Connect the power cable (14) to the connector (4), respecting the male-female couplings and using the anti-error
to direct the connector PINs.
• Turn the tool on by pressing the ON-OFF switch (7) and check that the LED (9) turns on.
The tool fitted on the pole starts working immediately when the power unit is turned on. Be sure to position
the tool away from people or property. Failure to comply with the warning is potentially dangerous for opera-
tor safety.
Pos. Denomination Function Picture
1 Handle
It houses the gearmotor, the electronic board and the switches
A
2 Pole fixing screws
They allow the extension poles to be blocked
A
3 Pole fixing clamp
Secures the extension poles A
4 Shell connector
Connects the power unit with the power cable
A
5 Identification sticker
Shows the identification details
B
6 Battery pack clamp
Connects the power cable with the battery poles E
7 ON-OFF switch
Turns the tool on and off
D
8 Fuse holder
Contains the protection fuse
D
9 LED
Indicates whether the tool is on or off D
10 Extension drive shaft
It transmits motion from the power unit to the mechanical head
E
11 Fixed pole
Tool support
E
12 Telescopic pole
Tool support E
13 Power cable connector
Connects the power cable with the power unit
D
14 15 m power cable
Connects the power unit with the lead battery pack
E
Technical data POWE.0123 POWE.0126
Power unit weight 950 g 950 g
Motor rotation speed
1,250 rpm ± 5% rpm at 12V 1,200 rpm ± 5% rpm at 12V
General warning Adequate clothing is mandatory
Reading the Use and
Maintenance Manual is
mandatory
Hand protection is mandatory
Head and hearing protection is mandatory
Foot protection is mandatory