12
6.1
Replacing the power-supply fuse
ATTENTION!
•
DISCONNECT THE POWER SUPPLY CABLE.
• Remove the fuse cover by means of a screwdriver (photo C1).
• Replace the fuse with a new one with the same features (photo C2).
• Replace the fuse cap. Put the fuse again into its holder, which has to be pushed back into its seat (photo C3).
6.2 Replacing the charge fuse
ATTENTION!
•
DISCONNECT THE POWER SUPPLY CABLE.
• Remove the fuse cover unscrewing the cap (4).
• Replace the fuse with a new one with the same features.
• Assemble the fuse cover again by screwing the cap (4).
ATTENTION!
Any maintenance operation which is not indicated in this manual has to be carried out by a CAMPAGNOLA
S.r.l. Authorised Service Point.
7.
Dismantling the components
7.1 General
At the end of its working life, the tool has to be dismantled in compliance with the regulations of the country where it
was used.
Содержание CLN 0505
Страница 2: ...1 2 3 C A 1 4 3 2 B 2 ...
