Camoplast Tatou, Руководство пользователя

Страница: 18 / 23

15
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
For optimum performance and maximum durability, please refer
to the following maintenance grid:
Do not use a brake cleaning solvent to clean the track system.
This may damage sealing components and stickers.

WARNING
Do not insert hands or feet into or near the System unless
the engine is off, and the vehicle is stopped with the secu-
rity brake engaged.
Elements to check and main-
tain
Frequency
Break-in
period
After
break-in
Rubber track tension 1 hour,
4 hours
20 hours
Bolt torque 1 hour
4 hours
Anti-pivot adjustment 4 hours
20 hours
Alignment (wheel alignment) N/A
20 hours
Condition of bearings and seal
ring wear sleeves (main pivot)
N/A
Once a
year
Visual inspection Before
riding
Before
riding

WARNING
After extreme environment uses (mud and water) and
inspecting all bearings once a year, please note that bear-
ings cannot be regreased like snowmobile bearings. If they
need to be serviced replace the wheel completely. Some of
the components (i.e. 5-in (132-mm) wheels) need special
tool for servicing. Please use appropriate tools to avoid any
damage to your component.