CamNtech Actiwatch AW7, Руководство по началу работы

Страница: 10 / 33

Actiwatch Guide to Getting Started 7.2 (July 2009)
Contents
The Actiwatch system is supplied with a CD ROM containing all
of the components of the software package. The following are
the minimum requirements of a host PC in order to be able to
install the Actiwatch software:
•
IBM compatible
•
Windows 2000, NT, XP or Vista operating system
•
100 MB hard disk space
•
USB or serial port (If a USB port is used then a USB –
Serial converter will be required if a blue faced reader is
being used – please see
Section 2.9
of the
Guide to
Getting Started
•
A CD-ROM drive or equivalent
•
Graphics (800 x 600 pixels minimum)
•
Printer (if hard copy output is required)
In general, a faster processor will provide superior performance.
The Actiwatch software is supplied on a CD ROM. This contains
all of the components required to effect a standard installation
including USB drivers for the reader. The Sleep/Activity software
should be installed
BEFORE connecting the USB reader. See
Section 2.7
for details of installing the USB reader drivers.
Legacy users of non-USB readers should consult Appendix A
for details of connection/use for this hardware.
To install the software, place the supplied CD ROM into the
CD/DVD drive on the host PC. The user then needs to select the
correct installation package depending on which operating
system is being used on the host PC. A different installer is used
for Windows XP/2000/Vista from that used for Windows 98/ME.
Please note that, following Microsoft’s decision to stop
supporting earlier versions of Windows, CamNtech cannot
guarantee that Actiwatch software is compatible with Windows
95 or 98.
Double clicking on the relevant folder brings up the Windows
Installer Icon shown below:
2. Installing the software
2.1 System requirements
2.2 Installing the
Actiwatch Software from
a CD ROM
2.3 Installing the Software
for the first time