FUNCTION SETUP > SCAN SETUP
OSD -
1 ~ 8
PRESET 1 ~ 255 / NOT USED
1/SEC ~ 180/SEC
CANCEL / OK
SCAN SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
SCAN NO.
1
ST POS.
2ND POS.
SCAN SPEED
1
PRESET
1
NOT USED
30
/SEC
UNDEFINED
SCAN SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
SCAN NO.
1
ST POS.
2ND POS.
SCAN SPEED
CLEAR SCAN
BACK
EXIT
1
NOT USED
NOT USED
30
/SEC
CANCEL
7
1
2
2
1st POS.
1. CW direction
2. CCW direction
2nd POS.
SCAN SETUP
By using the scan function, you can make the camera to move
between 2 preset positions repeatedly.
When the scan function runs, the camera moves from the
preset assigned as the 1st point to the preset assigned as the
2nd point in CW(Clockwise) direction. Then the camera moves
from the preset assigned as the 2nd point to the preset
assigned as the 1st point in CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point is same as the
preset assigned as the 2nd point, the camera turns on its axis
by 360° in CW direction and then it turns on its axis by 360°
in CCW direction.
SCAN NO.
Selects the scan number to edit. If a selected scan has not defined,
‘NOT USED’ is displayed in 1st position and 2nd position.
1ST POS. / 2 ND POS.
Set up the 2 position for scan function. If a selected preset is not defined,
‘UNDEFINED’ will be displayed as shown below.
SCAN SPEED
Sets the scan speed.
CLEAR SCAN
Deletes the current scan data.
>
Press Near/Enter Key
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<
PRESET SETUP
>
<
SCAN SETUP
>
<
PATTERN SETUP
>
<
GROUP SETUP
>
<
SCHEDULE SETUP
>
BACK
EXIT
