Camille Bauer SINEAX AM1000 Скачать руководство пользователя страница 64

Страница: 64 / 118

PM 1000162 000 14

Device handbook SINEAX AMx000

64/118

7.5.2 Configuration via web browser

It’s recommended to use either Google-Chrome or Firefox as browser.

Internet Explorer works with limitations only (partly missing texts, firmware update not possible)

For configuring via Webbrowser you have to display the device website using:

•

IPv4 communication: http://IPv4_addr, e.g. http://192.168.1.101

•

IPv6 communication: http://[IPv6_addr], e.g. http://[ fd2d:bb44:97f1:3976::1]

This request works only if device and PC are in the same network segment. Depending on the device
version, there may be multiple network interfaces with different

default IP addresses

If the

secure communication via https

is activated and the root certificate installed, you have to use https

instead of http for displaying the website

Device website using Google Chrome

The locker symbol shows that a secure connection is established (if https
is used)

There are three information here:

•

The SD-card is present and stores data

•

A network connection is established

•

User and permissions management is active, but no user is logged in so

far.

Via WEB-GUI you can make the same settings as via the

local GUI

using the Settings menu. In

addition, it is possible to setup the

security system

and the

Data export scheduler

and to enter

user-defined event or description texts in UTF8 format.

Содержание SINEAX AM1000























































































































Результаты поиска

Содержание SINEAX AM1000

Отзывы:

Camille Bauer SINEAX AM1000, Руководство по эксплуатации, Страница: 64 / 118

Результаты поиска

Содержание SINEAX AM1000

Отзывы: