Camille Bauer CAM mobile, Руководство пользователя

Страница: 47 / 66

47/66
B6 Lists
The Lists allows performing a chronological recording
of events, alarms or system messages. At a later time
it's possible to understand and analyze each state
change of the power system and each intervention to
the device in a correct time sequence.
All recordings can be displayed on request, with time
stamp and dedicated text. If the security system has
been activated for specific displays also the involved
user is available. This way it's e.g. possible to see
later on which user has acknowledged an alarm.
access to list information
Via the menu item lists in the main menu the sub-
menu lists can be entered. If no lists are active or the
option is not implemented, then after the selection of
the menu item lists no further action is performed.
available information
For each list entries with time stamp and explanatory
text may be requested. There is no list display if still
no entries exist or if the list hasn't been configured for
use, e.g. if the number of events to record is 0.
Alarm list / event list
The list contains all alarms / events, which has been
intended for recording in the alarm resp. event list
using the logic module. For the entries the texts will be
used which have been defined in the logic module for
the appropriate state change. The following will be recorded with time stamp:

The occurrence of the event

The determination of the event
A possible acknowledgement of alarms will be
recorded in the operator list. Events are not subject
for acknowledgement.
list entry
The time stamp shows the time of the occurrence of
the event. The user defined text gives further
information about the event. Also given is the number
of the associated logic function. By means of the keys

and

it's possible to browse the existing entries.