CamFi ZF, Руководство пользователя

Страница: 7 / 24

4
www.cam-fi.com
Installation Instructions
Adjust the Base Plate with Rail Rods and the Quick Release Plate
according to the camera body size
There are two types of camera bodies:
Normal sized cameras (shown in the left image) include the Sony Alpha series,
Canon cameras except the 1D series, Nikon cameras except the D4-D6 series.
Large sized cameras (shown in the right image) include the Canon 1D series,
Nikon D4-D6 series, Fuji GFX100 and other cameras that are equipped with a
camera battery grip.
Normal sized Large sized
The default assembly in the package conforms to normal sized cameras. If
you use a large sized camera, you need to adjust Module A first. Follow the
diagram below:
Steps:
1. Locate the large hex key (aka allen wrench) in the package (lower left
image).
2. Remove the screw highlighted in yellow (upper left image) using the hex
key.
3. Flip the assembly (upper right image).
4. Use the screws from the quick release plate and align them with the screw
holes on the bottom of the camera. Hand tighten the screws. At this time, there
is no need to tighten the bottom screws.