Cameron NUFLO MC-III EXP, Руководство пользователя

Страница: 63 / 143

57
MC-III™ EXP Flow Analyzer Section 4
Security Setup
Setting a keypad security code will prevent unauthorized personnel from altering calibration data or resetting
totals, and the security function is recommended to preserve data integrity of the system. The MC-III EXP’s
keypad security feature is disabled at the factory.
To enable the security protection, check the “Keypad Lock” checkbox on the System Setup screen, and enter
a four-digit lock code in the field below the checkbox. (Do not use “0000.”) The security feature will be
activated the next time a user attempts to access the keypad.
Firmware Version Number
As firmware is upgraded, firmware version numbers change. The firmware version number shown may assist
technical support personnel in troubleshooting an operational issue.
Serial Number
The serial number of your MC-III EXP can be used to track the history of your unit to include warranty status.
Communications Port
The Communications Port screen (Figure 4.18) allows users to change the settings that are required for
Modbus
®
communication.
Figure 4.18—Communications Port screen
Slave Address
The slave address allows the MC-III EXP to communicate with other devices via Modbus
®
. It is a number
that ranges from 1 to 65535, excluding 252 to 255 and 64764. If a Modbus
®
request message contains the
matching slave address, the device will respond to the request. In network arrangements, the slave device
must have a unique address. For more information about Modbus
®
communications, refer to the protocol
manual section.