Cameron NUFLO MC-III EXP, Руководство пользователя

Страница: 56 / 143

50
Section 4 MC-III™ EXP Flow Analyzer
Configuration Wizard
The Configuration Wizard is ideal for first-time users who want to perform a basic calibration for liquid or gas
measurement. By following the instructions on nine screens, even a first-time user can successfully configure
the MC-III EXP.
See
Table 4.1, page 51
, for a list of settings that are configurable with the keypad, the software Configuration
Wizard, and the software MC-III Main Screen.
Important: The Configuration Wizard does not allow multipoint calibration or gas volume
correction. To select these parameters, the user must access the MC-III Main screen.
Caution: Do not use the Configuration Wizard to change individual settings. When the Configura
-
tion Wizard is used, system default settings are restored before the new settings entered
in the Calibration Wizard are written to the program. Previous configuration settings are
saved automatically in
C:\NuFlo log data\MC-III\Config Backup Files.
Using the Pencil Tool
The data entry fields in the Configuration Wizard are highly intuitive, and most can be completed by clicking
in the field and entering new data or selecting a checkbox. For data fields that require the user to enter a value,
such as a K-factor, and designate a decimal position, a pencil icon provides a link to a data-entry window.
To enter a new value, click on the pencil icon (Figure 4.14). A new window will appear, allowing the user
to enter a new value, and designate the appropriate decimal position using a slide bar. This method ensures
that the decimal point setting and data-entry resolution displayed in the software and on the instrument LCD
correlate.
This tool is used to enter the calibration factor, flow rates for 4-20 mA output, and the scale factor for pulse
output.
Figure 4.14—Pencil tool icon and data-entry window