Camerio RX368_V2, Руководство пользователя

Страница: 175 / 178

RX
User
Guide
Page 170
Audit Trial Log Description
RECORD MODE Change recording mode
DISK MODE Change recording disk mode
QUALITY Change recording quality
IMAGE SIZE Change recording image size
SWITCH NAME Change switch name
SWITCH TYPE Change switch type
DATE TIME Change date time
NETWORK Change IP, subnet mask. Change / enable / disable gateway
PORT Change port
DNS Enable / disable DNS
DNS ADDRESS Change DNS address
SURELINK Enable / disable sure LINK
SULK ADDRESS
Change
sure LINK
address
SULK REFR RATE
Change
sure LINK
refresh rate
MODEM BAUD RATE Change modem baud rate
MODEM RING CNT Change modem ring count
THROUGHPUT Change video recording server throughput
ARM/DISARM Enable / disable arm/disarm input
ARM STATE Change arm state
ARM TMR TYPE Change arm/disarm tamper type
ASSOCIATE SW 1 Enable / disable arm/disarm associate switch 1
SECURITY SWITCH Enable / disable security switch
SECUSW ON STATE Change security switch on state
SECUSW TMR TYPE Change security switch tamper type
ASSOCIATE SW 2 Enable / disable security switch associate switch 2
ALARM Enable / disable alarm sensor
ALARM NAME Change the alarm sensor name
ALARM SEN TYPE Change alarm sensor type
ALARM TMR TYPE Change alarm tamper type
ZONE TYPE Change alarm sensor zone type
ENTRY DELAY Change alarm sensor entry delay
EXIT DELAY Change alarm sensor exit delay
MOTION Enable / disable motion
MOTION BLOCK Change motion block
MOT SENSITIVITY Change motion sensitivity
VIDEOLOSS Enable / disable video loss
SYSTEM TAMPER Enable / disable system tamper
SYSTMR SEN TYPE Change system tamper sensor type
POWER FAILURE Enable / disable power failure
PWRFAL SEN TYPE Change power failure sensor type
DISK USAGE Enable / disable disk usage
HDD USAGE LEVEL Change disk usage warning level
OVERHEAT Enable / disable overheat
[EVENT] RECORD Enable / disable recording action for the event
[EVENT] REC CLDU Change recording duration after event clear
[EVENT] REC MODE Change event recording mode
[EVENT] REC CAM Change event recording camera
[EVENT] SWITCH Enable / disable switch action