Camera Powershot SX230 HS, Руководство пользователя

Страница: 74 / 212

Adding Effects and Shooting (Creative Filters)
74
Color Swap
You can swap one color in an image for another when recording it. You can
only swap one color.
Choose
Y
.
z
Follow Steps 1 – 2 on p. 69 to choose
Y
.
Press the
l
button.
X The unchanged image and the Color Swap
image will alternately display.
z
The default setting is to change green to
gray.
Specify the color to be swapped.
z
Position the center frame so it is filled with
the color you want and press the
q
button.
X The specified color will be recorded.
Specify the target color.
z
Position the center frame so it is filled with
the color you want and press the
r
button.
X
The specified color will be recorded.
Specify the range of colors to be
swapped.
z
Press the
op
buttons or turn the
Â
dial
to adjust the range of colors to be
changed.
z
Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
z
Press the
l
button to complete the
setting and restore the shooting screen.
• Using the flash may cause unexpected results in this mode.
• Under some conditions, the image may appear coarse.