Cameo CL 200 G2, Руководство пользователя

Страница: 6 / 64

6
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
DMX
/
DMX Mode
3CH
DMX Mode
4CH
ENTER
Menu
Mode
Mode
DMX
ENTER
UP/DOWN
ENTER
DMX Mode
1CH
DMX Mode
2CH_1
DMX Mode
2CH_2
/ / /
Mode
Static
ENTER
UP/DOWN
Dimmer Strobe
Warm
white
Colde
white
- - -
ENTER - UP/DOWN ENTER - UP/DOWN ENTER - UP/DOWN ENTER - UP/DOWN
Dimmer
000 - 255
Strobe
000 - 255
W-White
000 - 255
C-White
000 - 255
ENTER ENTER ENTER ENTER
ENTER
/
Mode
Slave
/
OPERATION
As soon as the spotlight is correctly connected to the power supply, the following will be displayed in succession: "Welcome to Cameo", the
model name and the software version. After this process, the spotlight is ready for operation and starts in the previously selected mode. If the
DMX operating mode is activated and there is no DMX signal at the DMX input, the display will start to flash after a few seconds. After approxi-
mately 1 minute of inactivity, the display will automatically show the currently active operating mode.
SET DMX START ADDRESS (DMX Addr)
Press the MODE button repeatedly until "Menu" appears in the top line of the display. If necessary, select the menu item "Menu DMX Addr" using
UP and DOWN and press ENTER. Now select the desired DMX start address using UP and DOWN, and press ENTER to confirm.
Menu
DMX Addr
DMX Addr
001–512
ENTER
UP/DOWN
ENTER
SET OPERATING MODE (Mode )
Press the MODE button repeatedly until "Menu" appears in the top line of the display. If necessary, select the menu item "Menu Mode" us-
ing UP and DOWN and then press ENTER. Now select the desired operating mode using UP and DOWN and confirm with ENTER (see tables,
note sub-menus). The comprehensive DMX tables can be found in these instructions under “DMX CONTROL”.
Operating Modes
Mode DMX = DMX operating mode 1CH
2CH_1
2CH_2
3CH
4CH
= 5 different DMX modes to choose from. DMX tables –
see "DMX CONTROL".
Mode Slave = slave mode Slave = connect DMX IN on the slave unit to DMX OUT on the
master unit (same model) and enable the standalone
mode "Static" on the master unit. The slave unit will
now follow the master unit.
Mode Static = set a "scene" without an
external controller.
Static = dimmer, stroboscope (approx. 1–30 Hz), cold white and
warm white can be adjusted individually to settings
between 000 and 255.