ATS50AGS:
GEOMETRY
• The greater the motor angle, the greater
the opening speed and the slower the
gear motor’s thrust.
• The smaller the motor angle, the slower
the opening speed and the greater the
gear motor’s thrust.
• Lubricate the bushing and fit it into one of the holes on the post bracket.
• The bracket holes allow the opening angle to be changed.
Opening
A (mm)
B (mm)
E (mm)
F (mm)
C max. (mm)
90
°
200
200
1030
1430
150
90
°
200
270
1030
1510
200
120
°
200
140
1030
1460
70
Preliminary checks
Side hung gate GEOMETRY
(5m)
Tick
1. Check that the gate structure is sturdy enough, the hinges work efficiently and that there is
no friction between the fixed and moving parts
2. Make sure that measurement
C
does not exceed the value shown in the reference table
3. Make sure that you have fitted opening and closing mechanical gate stops
OUTward OPENING gates
For outward opening gate geometry
please refer to the full Installation Manual.
A
C
B
60
60
E
F
