CAMDEN inVISION CV-500PPK-V.2, Руководство по установке

Страница: 1 / 11

CV-500PPK-V.2
Stand-Alone Proximity System
Installation Instructions
CV-500PPK-V.2 Auxiliary Reader
B Request-to-exit PB1 12 Power Supply
E Alarm Input V Power Supply
M Common, PB1, E and 4 1 Data
O Door Relay N/O or N/C 2 Buzzer
C Common 3 Green LED
T Alarm output N/O contact 4 Common M
I1 Anti-tamper switch 5 Red LED
V1 Varistor
ST1
ST2 N/O or N/C Jumper selection
Relay 1 (door relay)
RL1 Door Relay
RL2 Alarm Relay
Figure 1 ‐ Wiring Diagram
Figure 2 ‐ Auxiliary Reader Connections
This device comes with a varistor.
The varistor must be connected on the strike
terminal (electromagnet…) operated by the
device.
If this product operates more than one strike,
each of them should have a varistor.
The varistor controls the overload produced
by the strike coils back emf when power is
removed.
12 V 1 4 5 3 2
Package Contents
1 Varistor
2 #6 x 1/4" Phillips Flt Head self
tapping screws
1 Small Jumper