Page 1 of 2
Page 1 of 2
CV-TXM2 Two Button Transmitter
USER MANUAL
The transmitter uses an AES128 encryption technology to protect
the transmission. The device is designed to inhibit code grabbers
from cloning the unique ID code.
The red LED will flash when the button is pressed. Replace battery
if no red flash occurs. Present your key fob to the card reader
for interior access control. Refer to your unique ID number on
the backside of the transmitter when corresponding with your
property manager.
GENERAL INFORMATION
The transmitters CX-TRM-2 ( 2 channels) transmit the rolling
security code at 433.92 MHz. They are powered by one
3V lithium battery (CR2032). To maintain the full working
efficiency of the battery, do not expose the product to very cold
temperatures or to sources of heat.
Intended use of the equipment: radio transmitter in long range
access control applications.
Typical use of the equipment: the equipment is not foreseen for
continuous operations.
CV-TXM2 Two Button Transmitter
USER MANUAL
The transmitter uses an AES128 encryption technology to protect
the transmission. The device is designed to inhibit code grabbers
from cloning the unique ID code.
The red LED will flash when the button is pressed. Replace battery
if no red flash occurs. Present your key fob to the card reader
for interior access control. Refer to your unique ID number on
the backside of the transmitter when corresponding with your
property manager.
GENERAL INFORMATION
The transmitters CX-TRM-2 ( 2 channels) transmit the rolling
security code at 433.92 MHz. They are powered by one
3V lithium battery (CR2032). To maintain the full working
efficiency of the battery, do not expose the product to very cold
temperatures or to sources of heat.
Intended use of the equipment: radio transmitter in long range
access control applications.
Typical use of the equipment: the equipment is not foreseen for
continuous operations.
CV-TXM2
CV-TXM2
