Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com
Opening New Doors to
Innovation, Quality and Support!
Page 1 of 2
File: CM-300 Series
Installation Instructions.indd R3
Revision: 29/10/2018
Part No.: 40-82B039
CM-300 SERIES EXIT SWITCH
INSTALLATION INSTRUCTIONS
FILENAME: CM-30 Instructions.doc Pg. 2
DRAWING No: DRG-CM300-060503
CM-300 Series Exit Switch Wiring Diagram
SCALE: NONE
DRAWN BY: DGW
REVISED:
DATE: 03/18/03
Yellow
Blue
Green
Black
Red
Light (-)
Light (+)
Camden Door Controls
NOTE:
LED Replacement
For 12V DC operation, cut off inline-resistor (on Black wire only).
For 24V DC operation, leave inline resistor in place.
Access to LED is obtained by first removing front rectangular lens with
a thin blade screwdriver.
Then, using a pair of needle-nose pliers, carefully pull LED straight out.
Re-installation is reverse of above sequence.
Be sure to line up both pins before pushing LED in.
Rear View of
CM-300 switch
and Faceplate
Normally
Closed
Normally
Open
Common
5502 Timberlea Blvd.
Mississauga, Ontario
L4W 2T7
