IMPOR
TANT SAFET
Y INSTR
UCTIONS
USER MANUAL
TECTON POWER AMP SERIES
P.2
IMPORTANT SAFETY INSTRUCTIONS
) Read the information for use (user manual).
2) Please keep this user manual in a safe place during the lifetime of the am-
plifier. The user manual forms an integral part of the amplifier. Reselling of the
amplifier is only possible if the user manual is available. Any changes made to
the amplifier have to be documented in writing and passed on to the buyer in
the event of resale.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this amplifier near water (for example, in damp rooms or near a
swimming pool).
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the user
manual.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus that produce heat.
9) Protect the power cord from being walked on, pinched or damaged in any
other way. Pay particular attention to plugs and the point where they exit from
the amplifier.
0) The amplifier may only be used in accordance with the information provided
in the user manual. Before and during the usage of the amplifier please ensure
that all recommendations, especially the safety recommendations as detailed in
the user manual, are adhered to.
The
TECTON
-Amplifier is designed for the amplification of pulsed audio signals
and the amplifier should only be connected to speakers with an average
impedance that is not lower than the impedances specified in points
3.8.2, 3.8.3
and
3.8.4.
) Do not place this amplifier on an unstable cart, stand,
tripod, bracket, or table. The device may fall, causing
serious injury, and serious damage to the device itself.
2) The amplifier can only be disconnected from the power supply by removing
the plug, which must be freely accessible at all times. Unplug this amplifier
during lightning storms or when unused for long periods of time.
3) Refer all servicing to qualified service personnel.
Servicing is required when
the power-supply cord or plug has been damaged,
liquid has been spilled or objects have fallen into the amplifier,
the amplifier has been dropped or damaged in any other way,
the amplifier has been exposed to rain or moisture,
when the amplifier exhibits a distinct change from its normal function or
performance.