MODEL #48475
™
WARNING
Tools for Installation
• (2) 13mm wrench
• (2) 17mm wrench
• Appropriate safety protection (gloves, eye
protection, etc.)
OR
• (2) Adjustable wrenches, 0 to 30mm
• The maximum weight capacity is 500 pounds
• Do Not Exceed vehicle or hitch manufacturer’s maximum tongue weight rating
• For use with Class III or better 2” hitch receiver only
• Distribute loads evenly. Do not load heavy objects toward the edges of the rack
• Do not load objects that overhang the rack's side rails
• Not for transport of people, animals, or flammable liquids
• Do not load items in close proximity to the exhaust pipe. If exhaust pipe extends toward the rack an
angled or curved exhaust tip must be used to redirect exhaust away from the cargo carrier
• Securely fasten cargo to the carrier
• Carrier should not be used if carrier is wider than the vehicle
• If carrier or cargo block license plate the license plate should be relocated to a more visible location
• Do not block rear tail lights with the carrier or cargo
CAUTION: CAMCO CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGES DUE TO IMPROPER
USE OR INSTALLATION OF THIS PRODUCT. CAMCO CANNOT BE
HELD ACCOUNTABLE FOR THE
STRUCTURAL INTEGRITY OF ANY FRAME.
NOTICE
If product components
are missing or damaged
do not return to
dealer, contact the
manufacturer.
1-800-334-2004
Installation Instructions
No.
Description
Qty.
1 Post
1
2 Basket
2
3 Cross Brace
2
4 Hitch Pin
1
5 Spring Clip
1
6 M8X35 Bolt
4
7 M8 Washer
4
8 M8 Lock Nut
4
9 M10X75 Bolt
4
10 M10 Washer
4
11 M10 Lock Nut
4
Includes:
HITCH MOUNT
CARGO CARRIER
WARNING:
READ THE FOLLOWING
INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING INSTALLATION.
2
1
4
3
5
6
9
10
11
7
8
Rear >