CAMBRIONIX U16S, Руководство пользователя

Страница: 32 / 37

U16S Page 32 of 37
Daisy chaining multiple PDsync-4 using expansion port
USB C cables can have variations in speed, power, and protocol capabilities. Some “active” or
E-mark type-C cables may not work on the daisy chain when connecting the expansion port to
another PDysnc-4. We recommend to use “passive” type-C cables and not to use cables fitted
with e-markers, see your cable supplier to see if e-markers are fitted.
Cannot access COM port
You may get an error message stating "COM (and then a number) could not be opened (Access
is denied)".
This is because an application has control over the COM port that the hub is connected to, and
no subsequent application can access the hub. To resolve this, you will need to close any
applications that control the COM port before opening another.
7.6. No GUI
If you are using a headless system with no GUI, then and you require to enable logging for
support issues, you can use the following command to create the logging cfg file manually:
echo *=DEBUG>/etc/opt/cambrionix/cambrionix.log.cfg
Then after re-producing the problem, you can zip the logs from the folder
/var/log/cambrionix
You may delete the file below when you are finished with it.
/etc/opt/cambrionix/cambrionix.log.cfg
7.7. Software troubleshooting
Some users have noted that the API can cause a high level of CPU usage. This can sometimes be
linked to the API recorder service. If you are finding this and you are not using it then we would
reccommend to uninstall it from your system entirely.