Cambium Networks RFU-C, Руководство по установке

Страница: 36 / 68

Chapter 6: RFU-C Configurations Antenna Connection
phn-4026 003v000
Page 6-11
1+1 Direct Mount Installation
List of Items
Table 14 Required items for 1+1 Direct Mount
Item Description Quantity Remarks
1 RFU-C RADIO 2
2 RFU-C COUPLER KIT 1
3 RFU-C TWIST KIT 1
Required Tools
The following tools are required for the RFU-C installation:
•
Metric offset hexagon key wrench #6
• Phillips #2 screwdriver
•
Metric offset hexagon key wrench #2.5 and #3
Procedure
In 1+1 direct mount installation, the RFU-C is attached to a coupler. To install a RFU-C in a direct mount 1+1
configuration:
Note
For 15 and 18 GHz frequencies, two O-Rings are supplied in the Twist kit and should be mounted in
the twist grooves.
For 6 GHz frequency, a gasket is used instead of an O-Ring. The gasket should be mounted between
the twist and the RFU-C Coupler kit.