Cambium Networks PTP 850E, Руководство пользователя

Страница: 69 / 560

Chapter 2: Getting Started Enabling the Interfaces (Interface Manager)
phn-3963_008v000
Page 2-26
Figure 21 Interface Manager – Edit Page
3. In the Admin status field, select Up to enable the interface or Down to disable the interface.
4. Click Apply , then Close .
To enable or disable multiple interfaces:
1.
Select the interfaces in the Interface Manager table or select all the interfaces by selecting the check box in
the top row.
2. In the Multiple Selection Operation section underneath the Interface Manager Table, select Admin status –
Up or Admin status – Down .
Figure 22 Multiple Selection Operation Section (Interface Manager Page)
3. Click Apply .
Note
The
Operational Status
field displays the current, actual operational state of the interface (
Up
or
Down
).