Cambium Networks PTP 850E, Руководство пользователя

Страница: 465 / 560

Chapter 18: Access Management and Security (CLI) Configuring X.509 CSR Certificates and HTTPS (CLI)
phn-3963_008v000
Page 18-15
Table 172 Certificate Download and Install CLI Parameters
Parameter Input Type Permitted Values Description
server-ipv4
Dotted
decimal
format. Any valid IPv4 IP
address. The IPv4 address of the PC or laptop you
are using as the SFTP server.
server-ipv6 Eight groups
of four
hexadecimal
digits
separated by
colons. Any valid IPv6 address. The IPv6 address of the PC or laptop you
are using as the SFTP server.
server-path Text String The directory path from which you are
downloading the certificate. Enter the
path relative to the SFTP user's home
directory, not the absolute path. If the
location is the home directory, it should
be left empty. If the location is a sub-
folder under the home directory, specify
the folder name. If the shared folder is
"C:\", this parameter can be left empty
or populated with "//".
filename Text String The certificate’s file name in the SFTP
server.
username Text String The user name for the SFTP session.
password Text String The password for the SFTP session. To
configure the SFTP settings without a
password, simply omit this parameter.
Enabling HTTPS (CLI)
By default, HTTP is used by PTP 850 as its web interface protocol.
To change the protocol to HTTPS, enter the following command in root view:
root> platform security url-protocol-set url-protocol https
Note
Make sure you have installed a valid certificate in the PTP 850 before changing the web interface
protocol to HTTPS. Failure to do this may prevent users from accessing the Web EMS.
To change the protocol back to HTTP, enter the following command in root view: