Cambium Networks PTP 850E, Руководство пользователя

Страница: 367 / 560

Chapter 15: Ethernet Services and Interfaces (CLI) Configuring Ethernet Services (CLI)
phn-3963_008v000
Page 15-23
Table 98 VLAN Bundle to Service Point CLI Parameters
Parameter Input Type Permitted Values Description
sp-id Number 1-32 for P2P and MP services.
1-30 for MNG services. The Service Point ID.
vlan Number 1-4094 (except 4092, which is
reserved for the default
management service)
The C-VLAN at the beginning of
the range of the VLAN Bundle.
to-vlan Number 1-4094 (except 4092, which is
reserved for the default
management service) The C-VLAN at the end of the
range of the VLAN Bundle.
The following command classifies C-VLANs 100 through 200 to Service Point 1 in Service 37:
service[37]>sp bundle cvlan attach spid 1 vlan 100 to-vlan 200
The following command removes C-VLANs 100 through 200 from Service Point 1 in Service 37:
service[37]>sp bundle cvlan remove spid 1 vlan 100 to-vlan 200
Displaying Service Point Attributes (CLI)
To display a service point’s attributes, go to service view for the service to which the service point belongs and
enter the following command:
service[SID]>sp service-point-info show spid <sp-id>
Table 99 Display Service Point Attributes CLI Parameters
Parameter Input Type Permitted Values Description
sp-id Number 1-32 for P2P and MP services.
1-30 for MNG services. The Service Point ID.
The following command displays the attributes of Service Point 1 in Service 37:
service[37]>sp service-point-info show spid 1
Deleting a Service Point (CLI)
You can only delete a service point if no VLAN bundles are attached to the service point. This is only relevant if the
interface type of the service point is bundle-c-tag or bundle-s-tag. For more information, refer to
Attaching a VLAN
Bundle to a Service Point (CLI) .
To delete a service point from a service, go to service view for the service and enter the following command:
service[SID]>sp delete spid <sp-id>