Cambium Networks PTP 850E, Руководство пользователя

Страница: 322 / 560

Chapter 13: Unit Management (CLI) Backing Up and Restoring Configurations (CLI)
phn-3963_008v000
Page 13-39
Parameter
Input Type
Permitted
Values
Description
directory Text String. The location of the file you are downloading or
uploading. If the location is the root shared folder,
it should be left empty. If the location is a sub-
folder under the root shared folder, specify the
folder name. If the shared folder is "C:\", this
parameter can be left empty or populated with
"//".
filename Text String.
The name of the file you are importing, or the
name you want to give the file you are exporting.
Note : You must add the suffix .zip to the file name.
Otherwise, the file import may fail. You can export
the file using any name, then add the suffix .zip
manually.
username Text String. The user name you configured in the FTP server.
password Text String.
The password you configured in the FTP server. If
you did not configure a password for your FTP
user, simply omit this parameter.
The following command configures the FTP channel for configuration file import and export to IP address
192.168.1.99, in the directory “current”, with file name “version_8_backup.zip”, user name “anonymous”, and
password “12345.”
root> platform configuration channel server set server-ip 192.168.1.99
directory \current filename version_8_backup.zip username anonymous
password 12345
Backing up and Exporting a Configuration File (CLI)
To save the current configuration as a backup file to one of the restore points, enter the following command in
root view:
root> platform configuration configuration-file add <restore-point>
To export a configuration from a restore point to the external server location, enter the following command in root
view:
root> platform configuration configuration-file export <restore-point>
Table 64 Configuration Backup and Restore CLI Parameters
Parameter Input Type Permitted Values Description
restore-point Variable restore-point-1
restore-point-2
restore-point-3 Identifies the restore point to or from
which to perform the backup
operation.