Cambium Networks PTP 850E, Руководство пользователя, Страница: 315 / 560

Chapter 13: Unit Management (CLI) Configuring the Internal Ports for FTP or SFTP (CLI)
phn-3963_008v000
Page 13-32
Configuring the Internal Ports for FTP or SFTP (CLI)
By default, the following PTP 850 ports are used for FTP and SFTP when the PTP 850 unit is acting as an FTP or SFTP
client (e.g., software downloads, configuration file backup and restore operations):
• FTP – 21
• SFTP – 22
To change the port for either protocol, enter the following command in root view:
root> platform management file-transfer port-config protocol <ftp|sftp>
port-number <0-65535>
To display the ports that are currently configured for FTP and SFTP, enter the following command in root view:
root> platform management file-transfer port-show
These ports are configured globally, rather than per specific operation.
The following sequence of commands displays the current (default) FTP and SFTP port settings, changes the FTP
port to 125 and the SFTP port to 126, and shows the new FTP and SFTP port settings.
root>platform management file-transfer port-show
Port config table:
==================
File transfer File transfer port
protocol number
=====================================
ftp 21
sftp 22
root> platform management file-transfer port-config protocol ftp port-
number 125
root> platform management file-transfer port-config protocol sftp port-
number 126
root>platform management file-transfer port-show
Port config table:
==================
File transfer File transfer port
protocol number
=====================================
ftp 125
sftp 126
root>