Cambium Networks PTP 850E, Руководство пользователя

Страница: 185 / 560

Chapter 7: Quality of Service (QoS) Configuring Classification
phn-3963_008v000
Page 7-11
3. Modify the parameters you want to change:
o DSCP – Read-only. The DSCP value to be mapped.
o
Binary
– Read-only. The binary representation of the DSCP value.
o
Description
– Read-only. The description of the DSCP value.
o CoS – The CoS assigned to frames with the designated DSCP value.
o Color – The Color assigned to frames with the designated DSCP value.
4. Click
Apply
, then
Close
.
Modifying the MPLS EXP Bit Classification Table
MPLS bits are used to provide QoS capabilities by utilizing the bits set in the MPLS labels. Classification by MPLS
bits is supported in both untagged and 802.1Q provider-tagged frames.
To modify the classification criteria for MPLS EXP bits:
1.
Select
Ethernet > QoS > Classification > MPLS
. The MPLS Classification page opens.
Figure 102 MPLS Classification Page