Chapter 9: Acceptance & Commissioning Procedures
Configuration
phn-3967_005v000
Page 9-3
Chapter 9:
Acceptance & Commissioning
Procedures
This chapter provides
Cambium Networks’
recommended Acceptance and Commissioning
Procedure for PTP 820. Acceptance and commissioning should be performed after initial setup is
complete.
The purpose of this procedure is to verify correct installation and operation of the installed link and
the interoperability with customer end equipment.
Cambium Networks’
Acceptance and Commissioning procedure includes the following stages:
•
Site Acceptance Procedure
•
Commissioning of radio link
The Site Acceptance Procedure is a checklist that summarizes the installation requirements of the
site at which the products were installed.
The commissioning tests cover the required configuration information that should be recorded,
and the tests that should be performed on the radio link.
