Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 778 / 1149

Chapter 16: Unit Management (CLI) Backing Up and Restoring Configurations (CLI)
phn-3965_006v002
Page 16-20
Parameter
Input Type
Permitted
Values
Description
password Text String. The password you configured in the FTP server. If
you did not configure a password for your FTP
user, simply omit this parameter.
Examples
The following command configures the FTP channel for configuration file import and export to IP address
192.168.1.99, in the directory “current”, with file name “version_8_backup.zip”, user name “anonymous”, and
password “12345.”
root> platform configuration channel server set server-ip 192.168.1.99
directory \current filename version_8_backup.zip username anonymous
password 12345
Backing up a Configuration File (CLI)
When downloading software, the IDU functions as an FTP or SFTP client. You must install FTP server software on
the PC or laptop you are using to perform the software upgrade. For details, see
Configuring the Internal Ports for
FTP or SFTP (CLI) ..
To set the file transfer protocol you want to use (FTP or SFTP), enter the following command:
root>platform configuration channel set protocol <ftp|sftp>
To set the FTP or SFTP parameters for configuration file import and export, enter one of the following commands
in root view:
If the IP protocol selected in platform management ip set ip-address-family is IPv4, enter the following
command:
root> platform configuration channel server set ip-address <server-ipv4>
directory <directory> filename <filename> username <username> password
<password>
If the IP protocol selected in
platform management ip set ip-address-family
is IPv6, enter the following
command:
root> platform configuration channel server-ipv6 set ip-address <server-
ipv6> directory <directory> filename <filename> username <username>
password <password>
You must configure from 1 to 3 restore points:
•
When you import a configuration file, the file is saved to the selected restore point, and overwrites whichever
file was previously held in that restore point.
•
When you export a configuration file, the file is exported from the selected restore point.
•
When you back up the current configuration, the backup configuration file is saved to the selected restore
point, and overwrites whichever file was previously held in that restore point.
•
When you restore a configuration, the configuration file in the selected restore point is the file that is
restored.