Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 618 / 1149

Chapter 11: Access Management and Security Configuring RADIUS
phn-3965_006v002
Page 11-14
Figure 364 Radius Configuration – Edit Page
4. In the IPV4 address field, enter the IP address of the RADIUS server.
5. In the Port field, enter the port ID of the RADIUS protocol in the RADIUS server.
6. In the Retries field, enter the number of times the unit will try to communicate with the RADIUS server
before declaring the server to be unreachable.
7. In the Timeout field, enter the length of time (in seconds) the device will wait during each communication
with the Radius server before retrying if no response is received.
8. In the Secret field, enter a text string that will serve as the password between the RADIUS server and the
RADIUS client. The string must be between 22 and 128 characters long.
9. Click Apply , then Close .
In addition to the configurable parameters described above, the Radius Configuration page displays the following
information for each RADIUS server:
•
Server Id – The server ID of the Radius server:
o
1 – The primary Radius server.
o
2 – The secondary Radius server.
•
Connectivity Status – The connectivity status of the Radius server in the last attempted connection:
o
True – The last connection attempt succeeded.
o
False – The last connection attempt failed.
Viewing RADIUS User Permissions and Connectivity
You can view RADIUS user connectivity and permissions information for all Radius users currently connected.
To view RADIUS users:
1. Select Platform > Security > Access Control > Radius > Radius Users . The Radius Users page opens.
Figure 365 Radius Users Page