Cambium Networks PTP 820 Series, Руководство пользователя, Страница: 571 / 1149

Chapter 9: TDM Services and Interfaces Configuring Advanced Pseudowire Parameters
phn-3965_006v002
Page 9-63
1 In the PseudoWire Profiles page ( Figure 333 ), click Add . The PseudoWire Profiles – Add page opens.
Figure 334 PseudoWire Profiles – Add Page
2 Configure the pseudowire profile parameters, described in Table 108 .
3 Click Apply , then Close .
Editing a Pseudowire Profile
To edit a pseudowire profile:
1 In the PseudoWire Profiles page ( Figure 333 ), select the profile you want to edit and click Edit . The
PseudoWire Profiles – Edit page opens.
2 Edit the pseudowire profile parameters, described in Table 108 . You can edit any of the parameters you can
configure when you add a profile except the Profile ID field.
3 Click Apply , then Close .
Deleting a Pseudowire Profile
To delete a pseudowire profile:
1 In the PseudoWire Profiles page ( Figure 333 ), select the profile you want to delete.