Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 383 / 1149

Chapter 6: Ethernet Services and Interfaces Configuring Ethernet Service(s)
phn-3965_006v002
Page 6-12
Figure 193 Ethernet Service Points Page – Ingress Attributes
Table 64 Service Point Ingress Attributes
Parameter Definition
Service point ID This ID is unique within the service. For Point-to-Point and Multipoint
services, the range of values is 1-32. For Management services, the range
of values is 1-30.
Service point name A descriptive name for the service point (optional). The Service Point
Name can be up to 20 characters.
Service point type The service point type. Options are:
•
SAP – Service Access Point.
•
SNP – Service Network Point.
•
MNG – Management service point.
•
PIPE – Pipe service point.
Learning admin Determines whether MAC address learning for incoming frames is
enabled (
Enable ) or disabled ( Disable ). When enabled, the service point
learns the source MAC addresses of incoming frames and adds them to a
MAC address forwarding table.
Allow flooding Determines whether incoming frames with unknown MAC addresses are
forwarded to other service points via flooding. Select
Allow to allow
flooding or Disable to disable flooding.
Allow broadcast Indicates whether frames with a broadcast destination MAC address are
allowed to ingress the service via this service point.. Select
Allow to allow
broadcast or Disable to disable broadcast.