![Cambium Networks PTP 550 Series Скачать руководство пользователя страница 34](http://html.mh-extra.com/html/cambium-networks/ptp-550-series/ptp-550-series_user-manual_485712034.webp)
Chapter 1: Product description
System management
Page 1-17
Network management
IPv4 and IPv6 interfaces
The PTP 550 ODU contains an embedded management agent with IPv4 and IPv6 interfaces.
Network management communication is exclusively based on IP and associated higher layer
transport and application protocols. The default IPv4 address of the management agent is
169.254.1.1. There is no default IPv6 address. The PTP 550 does not require use of
supplementary serial interfaces.
MAC address
The management agent end-station MAC address is recorded on the enclosure and is
displayed on the Status web page. The MAC address is not configurable by the user.
Managemnet VLAN
The device management interface can be assigned to a Management VLAN to separate
management traffic (device management via SNMP or HTTP) from user traffic.
Access to the management agent
The management agent can be reached from any Ethernet port at the local ODU.
Management frames are processed by the management agent if (a) the destination MAC
address in the frame matches the ODU MAC address, and (b) the VLAN ID in the frame
matches the VLAN configuration of the management agent.
MAC address and IP address of the management agent
The management agent does not provide the function of a dual-homed or multi-homed host.
Network designers should take care to ensure that the ODU will not be connected to more than
one IP network.
Web server
The PTP 550 management agent contains a web server. The web server supports the HTTP and
HTTPS/TLS interfaces.
Web-based management offers a convenient way to manage the PTP 550 equipment from a
locally connected computer or from a network management workstation connected through a
management network, without requiring any special management software. The web-based
interfaces are the only interfaces supported for installation of PTP 550.
Web pages
The web-based management interfaces provide comprehensive web-based fault, configuration,
performance and security management functions organized into the following web-pages and
groups:
•
Status: The Status web-page reports the detailed status of the PTP 550.
•
Installation: The Installation web-page is used to monitor installation-specific configuration
and status parameters.