Cambium Networks PTP 450 Series, Руководство по настройке

Страница: 296 / 649

Chapter 1: Configuration Configuring Radio via config file
Page
1-268
Configuring Radio via config file
The 450 Platform Family supports export and import of a configuration file from the AP or SM as a text
file. The configuration file is in JSON format.
To export or import the configuration file, the logged in user needs to be an ADMINISTRATOR and it
must not be a “read-only” account.
The exported configuration file contains the complete configuration including all the default values. To
keep a backup of the current configuration, the file can be saved as-is and imported later.
While importing a configuration file, it can be either imported the full configuration or a sparse
configuration containing only the items that need to be changed. If a sparse configuration file is
imported, only the items in the file will be imported. Other configuration will remain unchanged. There
could also be used a special flag in the configuration file to tell the device to apply the configuration
starting from factory default (Refer
Special Headers for configuration file on page 1-269 ).
Import and Export of config file
The config file import and export is supported in Configuration > Unit Settings page. The procedure
for importing and exporting config file is explained below.
Figure 43 Configuration File upload and download page
The DHCP server configuration procedure is as follows:
Procedure 17 DHCP server configuration
1 Login to the GUI and go to Configuration
>
Unit Settings.
2 Under Download Configuration File tab, click on the “<mac>.cfg” link, where <mac> is the
MAC address of the device (for example, “01003ea2c274.cfg”).
3 Save the file to the local disk.
The below procedure is to be followed for Importing a config file
Procedure 18 Import the configuration from the GUI
1 Login to the GUI and go to Configuration → Unit Settings.