Cambium Networks PTP 450 Series, Руководство по настройке

Страница: 275 / 649

Chapter 1: Configuration Configuring quality of service
Page
1-247
Note
This strict priority transmission order is only true in all cases if the SM Prioritization and
Weighted Fair Queue features are disabled. If either feature is enabled, see the
description of those features in this document for how they impact and interact with this
transmission order.
Setting the Configuration Source
The AP includes a Configuration Source parameter, which sets where SMs that register to the AP are
controlled for MIR, CIR, VLAN, and the high-priority channel as follows. The Configuration Source
parameter affects the source of:
• all MIR settings:
o
Sustained Uplink Data Rate
o
Uplink Burst Allocation
o
Max Burst Uplink Data Rate
o
Sustained Downlink Data Rate
o
Downlink Burst Allocation
o
Max Burst Downlink Data Rate
• all CIR settings:
o
Low Priority Uplink CIR
o
Low Priority Downlink CIR
o
Medium Priority Uplink CIR
o
Medium Priority Downlink CIR
o
High Priority Uplink CIR
o
High Priority Downlink CIR
o
Ultra High Priority Uplink CIR
o
Ultra High Priority Downlink CIR
• all SM VLAN settings
o
Dynamic Learning
o
Allow Only Tagged Frames
o
VLAN Aging Timeout
o
Untagged Ingress VID
o
Management VID
o
VLAN Membership
• the High Priority Channel setting