8
The installer must have sufficient skills, knowledge and experience to perform the installation task and is
responsible for:
•
Familiarity with current applicable national regulations including radio regulations, electrical
installation regulations, surge protection regulations and ‘working at heights’ regulations
•
Installation in accordance with Cambium Networks instructions
•
Confirming that the equipment settings are compliant with national or regional regulations
•
Familiarity with training material available on the Cambium Networks website (see link below)
Please observe the important instructions below during installation. This will set the equipment in compliance
with national regulatory regulations and ensure legal operation.
•
Ensure that the 450 series equipment is fitted with the latest application code. The software version
must be Canopy 16.x.x or later in order to comply with national regulations. Software is available from
the Cambium Support Centre web site, see link below.
4.
Product Safety information
Observe the following safety rules:
•
Ensure that the Outdoor Unit (ODU) and the structure on which it is mounted is capable of
withstanding the maximum wind speeds at a proposed site.
•
Ensure the equipment is not powered during installation. Always disconnect equipment from its
power source before servicing.
•
Harmful levels of RF radiation are present close to the antenna when the transmitter is on.
Observe the minimum safe distance limit for 450 products provided below.
Ensure that equipment is installed in a position avoiding any radiation hazard to humans.
Exercise extreme care when working at heights. Observe national ‘working at heights’ regulations. Use trained
‘competent’ staff.
Exercise extreme care when working near power lines.
Always use a qualified electrician to install cabling.
The Outdoor Unit (ODU) must be properly grounded.
Always use the specified Cambium 450 platform power supply units (PSU) to power the equipment. Failure to
use the specified Cambium supplied PoE could result in equipment damage and may cause a safety hazard.
Do not deploy Cambium Networks power injectors in an outdoor environment
Structures, equipment and people must be protected against electrostatic discharge: -
by siting equipment in a lightning protection zone
by installation of appropriate lightning conductors to conduct the surge current to ground via a separate
preferential solid path.
ground bonding and transient voltage surge suppression is recommended. Use Cambium specified surge
suppressors.
The ODU enclosure may be hot to the touch when in operation.
Use outdoor rated cables for connections that will be exposed to the outdoor environment. Install Cambium
recommended cables.
Содержание PMP/PTP 450 Series
