PMP 450 Planning Guide
Table 5 AP LED descriptions
LED
Color when active Status information provided Notes
PWR
red
DC power
Always lit when power
is correctly supplied.
SYN/1
yellow
Presence of sync
Always lit on the AP.
SES/2
green
Unused on the AP
GPS/3
red
Pulse of sync
Continuously lit as pulse as
AP receives pulse.
ACT/4
yellow
Presence of data activity
on the Ethernet link
Flashes during data
transfer. Frequency of flash
is not a diagnostic
indication.
LNK/5
green
Ethernet link
Continuously lit when link
is present.
Network connection
The network connection to a PMP 450 Series AP is made via a 10 BaseT or 100 BaseT Ethernet connection. Power
is provided to the AP over the Ethernet connection using a patented non-standard powering technique.
AP power supply
The AP power supply generates the AP supply voltage (29 VDC) from the external DC source and injects the
supply voltage into the AP.
The power supply is connected to the AP and network equipment using Cat5e cable with RJ45 connectors. See
Cabling and lightning protection
The PMP 450 AP can use the GigE power injector
.
pmp-0047 (March 2014)
1-19
Содержание PMP 450
